Configuring Base Station Modes

Here’s a quick look at how to configure your Sonetics DECT7 Wireless Base Station for each of its three operating modes.

 

Digital Intercom Connection:

  1. Disconnect the base station from the power supply.
  2. Hold down pairing buttons 1 and 2 while connecting the power supply.

    Wait until only the yellow LED lights above pairing buttons 1 and 2 light up as well as the green POWER LED light.  The green LED lights on the ports 1 and 2 will also light up.
  3. Unplug the base station and plug it back in.

Legacy Analog Intercom:

  1. Disconnect the base station from the power supply.
  2. Hold down pairing buttons 2 and 3 while connecting the power supply.

    Wait until only the yellow LED lights above pairing buttons 2 and 3 light up as well as the green POWER LED light.  The green LED lights on the ports 2 and 3 will also light up.
  3. Unplug the base station and plug it back in.

Base Station Portable ComHub Connection:

  1. Disconnect the base station from the power supply.
  2. Hold down pairing button 3 while connecting the power supply.

    Wait until only the yellow LED light above pairing button 5 lights up as well as the green POWER LED light. 
  3. Select the pairing button that matches the number of channels you need. The yellow LED light will come on above it.
  4. Unplug the base station and plug it back in.
  5. Repeat steps 1 – 4 to when needing to readjust the number of channels.